DIRECTIONS FOR USE

1. Shake well before use.
2. Clean the surface of any contaminants, weld spatter etc.
3. Spray from a distance of 15-20 cm in short dusting strokes.
4. Allow coating to dry for at least 10 minutes.
5. Repeatto obtain thicker coating
6. To prevent clogging turn can upside down and spray until only propellent comes out.

CAUTION

1. Contents under pressure – do not puncture or incinerate.
2. Do not expose to temperatures exceeding 45°C. Store away from sunlight.
3. Do not pierce or burn, even after use.
4. Do not spray on naked flame or any incandescent material.
5. Keep away from sources of ignition. No smoking! Build-up of explosive mixtures possible without sufficient
   ventilation.
6. Keep away from reach of children.